Din En 13155 Pdf Exclusive

DIN EN 13155 is the "bible" for the lifting attachment industry. If you are an engineer, a safety inspector, or a manufacturer, this document is not optional—it is a requirement for legal operation and safety.

The standard (incorporating EN 13155:2020) defines the safety requirements for non-fixed load lifting attachments, such as clamps, vacuum lifters, magnets, and lifting beams, ensuring compliance with the Machinery Directive 2006/42/EC. Key Requirements and Scope din en 13155 pdf exclusive

List every lifting attachment (vacuum, magnet, beam, clamp). For each, check the . If it was built before 2020, verify it meets retroactive requirements in Clause 8 (Information for use). DIN EN 13155 is the "bible" for the

DIN EN 13155 is a European Standard that outlines the safety requirements for the design, manufacture, and use of cranes, hoists, and their associated components. The standard covers a wide range of equipment, including overhead traveling cranes, gantry cranes, tower cranes, mobile cranes, and hoists. The primary goal of DIN EN 13155 is to ensure that these pieces of equipment are designed and constructed to provide safe working conditions for users, minimize the risk of accidents, and prevent injuries and fatalities. Key Requirements and Scope List every lifting attachment

Electric (battery or mains-fed), permanent, and electro-permanent magnets. Beams and Hooks: Lifting beams, C-hooks, and lifting forks. Lifting Inserts:

: Mechanical load-bearing parts must withstand a static load of the Working Load Limit (WLL) without permanent deformation. Load Retention : In "test-only" scenarios, the attachment must hold