9e102 Datasheet [ 360p ]

Without the full datasheet suffix, assume ±10% (K tolerance). If the original marking includes a letter after 102 (e.g., "9E102K"), the K indicates ±10%. J = ±5%, M = ±20%.

Months later, a child delivered a letter with wax the color of stale tea. Inside, in a hand Mara almost recognized, was a single line: "We remember because somebody had to." No signature. No return. 9e102 datasheet

In op-amp circuits (e.g., non-inverting amplifier), a 9E102 placed in parallel with the feedback resistor reduces high-frequency gain and prevents oscillation. For a gain of 10, with Rf = 10 kΩ, the 1 nF cap creates a pole at ≈ 16 kHz. Without the full datasheet suffix, assume ±10% (K

Connect a TTL signal (e.g., from a button debouncer or logic gate) to Pin 2. The output on Pin 6 provides a clean, delayed copy. Useful for: Months later, a child delivered a letter with

Ensure pads are cleaned with isopropyl alcohol and fresh flux is applied to avoid "cold" solder joints.

is an integrated circuit (IC) part number typically associated with the