If you only see "Remote NDIS," return to pre-installation steps.
Once connected, the dashboard will populate with numbers. Here is a cheat sheet for the most important metrics: lte hmonitor install
Even if HMonitor doesn't see the signal yet, you can use a terminal (Putty) on the standard modem COM port to send: AT^SETPORT="FF:FF:FF:FF:FF:FF,FF:FF:FF:FF:FF:FF" This command re-enables all disabled ports (Diag, Modem, PCUI, GPS). Upon reboot, the modem will enumerate 3-4 separate COM ports. HMonitor will lock onto the PCUI or Diag port. If you only see "Remote NDIS," return to