Fagor Fi-80 Dishwasher Manual Updated Guide

: Ensure the overflow tube is correctly seated. The machine will fill and heat until the wash and rinse lights indicate it is ready.

💡 If your FI-80 is leaking from the hood, check the hood springs and cables immediately, as these are high-wear parts that lose tension over time. [5.5] To help you further, could you tell me: fagor fi-80 dishwasher manual

, a water softener is required to prevent scale buildup and maintain warranty. Electrical: : Ensure the overflow tube is correctly seated

| Code | Meaning | |------|---------| | | Water intake problem (no water or blocked inlet hose) | | E2 | Drain issue (blocked filter/pump or kinked drain hose) | | E3 | NTC temperature sensor failure | | E4 | Overflow / leak detected | | E5 | Heating element issue | | E6 | Wash motor problem | | E9 | Continuous fill / water inlet valve stuck | Table salt contains anti-caking agents that will clog

No. The manual explicitly warns against this. Table salt contains anti-caking agents that will clog the water softener and corrode the stainless steel interior.

Approximately 675 mm (W) x 675 mm (D) x 1400 mm (H).